Product Overview
The CN165 basic unit has 18 Positive and 18 Negative Terminals.
Input terminal will handle up to 15 Amps the board can be used for 12DC to 24vDC. (The board can be used with higher voltages however the resister should be removed to disable the LED)
The LED will show Green if the Polarity is correct Red if the Polarity is reversed by mistake or Orange if you are running a DCC system.
Write on patch for board Voltage and board No. There are 6 Fixing holes available and cable tie holes also available for Input cables.
There are 3 ways to connect to the CN165 Distribution Board.
Input terminal will handle up to 15 Amps the board can be used for 12DC to 24vDC. (The board can be used with higher voltages however the resister should be removed to disable the LED)
The LED will show Green if the Polarity is correct Red if the Polarity is reversed by mistake or Orange if you are running a DCC system.
Write on patch for board Voltage and board No. There are 6 Fixing holes available and cable tie holes also available for Input cables.
There are 3 ways to connect to the CN165 Distribution Board.
